PROJECT SPECIFICATIONS
TIMBER COVE RESIDENCES

CONCRETE
GARAGE FLOORS: Provide a smooth trowel finish with a 1/8-inch-per-foot slope to the
front of the garage. Apply (2) coats primer/sealer.
DRIVEWAYS/SIDEWALKS: Provide a non-slip light broom finish.

CASEWORK
CABINET BOXES: Plastic laminate or melamine.
PULLS: 4-inch wire style; brushed nickle
DRAWER SLIDES: Soft close
CABINET DOORS: Soft close hinges, with bumper pads
COUNTERTOPS: 3mm Quartz with integral 4-inch backsplash.
SHELVING: Melamine with adjustable shelf pegs.

ROOFING
ROOF SHINGLES: Owens-Corning True Definition, 130-mph rated.
GUTTERS: 5-inch aluminum K-style gutters with 3x2 downspouts. Paintable.

SIDING
LAP SIDING: Hardie Plank Lap Siding with 6-inch exposure.
BOARD AND BATTEN: Hardie Panel with battens at 2-foot on-center.
TEXTURED BOARDS: Hardie Panel with stucco texture.
SHINGLE: Hardie Shingle, straight edge.
STONE: Coronado Stone manufactured stone veneer.
TRIM: 4-inch nominal trim.

DOORS
ENTRY DOOR: Solid wood door.
PATIO DOOR: Full light patio swing door: 1-3/4”
GARAGE-ENTRY DOOR: Solid core steel door: 1-3/4”.
GARAGE-OVERHEAD DOOR: 16X7 insulated sectional door. Provide a belt drive or
screew drive style opener.
INTERIOR DOORS: Hollow core, 4-panel doors.
DOOR HARDWARE: Brushed nickle.

WINDOWS
STYLE: Vinyl.
OPERATION: Fixed and horizontal slider.
COLOR: White

Wilson Architects PLLC
404 E 15th St. #7 – Vancouver, Wa. 98663 – (360) 696-4722 – www.wilsonarchitects.us

FLOORING
ENTRYWAY: 12” porcelain tile.
KITCHEN: LVT plank
RESTROOMS: LVT plank
LAUNDRY: LVT plank
KITCHEN: LVT plank
LIVING ROOM: LVT plank
HALLWAYS: LVT plank
BEDROOMS: Carpet
WALL BASE: 4-inch MDF in all locations.

INTERIOR WALLS
FINISH: Light orange-peel.
PAINT: White, semi-gloss.

CEILINGS
FINSIH: Smooth
Paint: Velvet

TOILET ACCESSORIES
MIRROR: Minimum 24x30 frameless mirror
TOILET PAPER DISPENSER: Wall mount, brushed nickle.
TOWEL RING: Brushed nickle, (2) per restroom.
CURTAIN ROD: Curved metal.
TOWEL BAR: 24-inch standard. 18-inch acceptable where space is limited.

APPLIANCES
RANGE: Kitchenaid gas range with integral oven; stainless steel.
RANGE HOOD: Kitchenaid undercabinet hood; stainless steel
REFRIGERATOR: Kitchenaid 26 c.f. french door refrigerator; stainless steel.
DISHWASHER: Kitchenaid 24-inch dishwasher; stainless steel.
WASHING MACHINE: Whirlpool 4.6 c.f. top load washing machine; white.
DRYER: Whirlpool 7.0 c.f. top load dryer; white.

PLUMBING FIXTURES
KITCHEN SINK: Stainless steel undermount sink.
RESTROOM SINK: Porcelain drop in sink, round.
FAUCETS: Brushed nickle.
TOILETS: White, dual-flush tank style.
SHOWERS: 3x3 fiberglass insert, brushed nickle shower head and handle.
TUB: 3x5 fiberglass insert, brushed nickel shower head and handle.
WATER HEATER: Navien NPE-180S2 gas tankless hot water heater.

Wilson Architects PLLC
404 E 15th St. #7 – Vancouver, Wa. 98663 – (360) 696-4722 – www.wilsonarchitects.us

HVAC EQUIPMENT
WALL HEATERS – BEDROOMS, LIVING ROOM: Alcove Cove Heaters.
WALL HEATERS – ENTRY, RESTROOMS: Cadet fan forced electric resistence.
RESTROOM EXHAUST FANS: Panasonic Whisper Green.
WHOLE HOUSE VENTILATION: Panasonic Intelli-Balance

ELECTRICAL
PANEL: Each residence to have a 200a 120/240 panel.
GENERAL LIGHTING: Provide a mixture of 4-inch recessed lights and switched
receptacles.
VANITY LIGHTING: Provide 3-bulb vanity lights over restroom mirrors.
OUTLETS: Assume (1) 120v outlet for every 20-feet of linear wall length. Provide
240v dedicated receptacles in the laundry, kitchen, bedrooms, living room and
garage.